9 Grid Garden Pavement Mold Garden Walk Pavement Concrete Mould DIY Manually Paving Cement Brick Stone Road Concrete Molds
Material: PP resin
Irregular size: 35*35*3.6cm/13.77*13.77*1.41”Instructions:
Mix the cement with water according to the packing instructions. When ready for use, the concrete will be the consistency of the oatmeal and thick enough to hold the edges when cut with a shovel.
Fill the paver mold, plow the concrete with a shovel and make sure to fill each area.
Use rubber gloves to spread the concrete around the mold and fill any gaps or low points. Tap the mold by hand to remove any air bubbles.
Smooth the concrete according to the
Allow the concrete to set up to five minutes and carefully remove the mold. For the next stretch, rotate the mold a quarter turn and place it next to the paver you just finished. If you are creating a curved path, tilt it slightly.
After allowing the concrete to solidify overnight, fill the crack with dirt and rinse off the excess. Wet the ground around the newly formed paver to help them settle.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 X Pavement Mold
Very good quality solid sends fast thanks to store
Good product thank you to the store I recommend this shop
Okay, although I don’t remember what measure I asked for and if the one I really needed came, but thanks
I paid for the size 43 × 43, and came 35 × 35. Opened the dispute, asked to return the difference, but the dispute closed without refund. Judging by the reviews of this store, this often happens. Therefore, either immediately order a smaller size, or contact another seller. I put 5 stars to make the review higher. I do not recommend the seller.
Perfect, that’s what I was looking for. In the first two photos, it is unfilled together and the second one is filled in. Of the two ways I like the final result
but I haven’t try it yet
Received, all as described.